MAX8511 |
RFQ for MAX8511 Required Field |
 |
| Technical/Catalog Information | MAX8511ETA18+T |
| Vendor | Maxim Integrated Products |
| Category | Integrated Circuits (ICs) |
| Regulator Type | Single Output |
| Package / Case | 8-TDFN Exposed Pad |
| Packaging | Tape & Reel (TR) |
| Regulator Topology | Positive Fixed |
| Current - Output | 120mA |
| Voltage - Output | 1.8V |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Input | 2 ~ 6 V |
| Number of Regulators | 1 |
| Current - Limit (Min) | 130mA |
| Current Short Circuit (Isc) | - |
| Drawing Number | 175; 21-0168; TA; 8 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MAX8511ETA18+T MAX8511ETA18+T |
| Product | Manufacturers | Pack | D/C |
| MAX8511 | Maxim | MAXIM | 04+ |
The MAX8510/MAX8511/MAX8512 ultra-low-noise, lowdropout (LDO) linear regulators are designed to deliver up to 120mA continuous output current from a tiny 5-pin SC70 plastic package. These regulators achieve a low 120mV dropout for 120mA load current. TheMAX8510uses an advanced architecture to achieve ultra-low output voltage noise of 11VRMS and PSRR of 54dB at 100kHz.
The MAX8511 does not require a bypass capacitor, hence achieving the smallest PC board area. The MAX8512's output voltage can be adjusted with an external divider.
The MAX8510/MAX8511 are preset to a variety of voltages in the 1.5V to 4.5V range. Designed with a Pchannel MOSFET series pass transistor, the MAX8510/MAX8511/MAX8512 maintain very low ground current (40A).
The regulators are designed and optimized to work with low-value, low-cost ceramic capacitors. The MAX8510 requires only 1F (typ) of output capacitance for stability with any load. When disabled, current consumption drops to below 1A.
Typical Application |
Features |
| Cellular and Cordless PhonesPDA and Palmtop ComputersBase StationsBluetooth Portable Radios and AccessoriesWireless LANsDigital CamerasPersonal StereosPortable and Battery-Powered Equipment | `Space-Saving 5-Pin SC70 Package`11VRMS Output Noise at 100Hz to 100kHz Bandwidth (MAX8510)`78dB PSRR at 1kHz (MAX8510)`120mV Dropout at 120mA Load`Stable with 1F Ceramic Capacitor for Any Load`Guaranteed 120mA Output`Only Need Input and Output Capacitors (MAX8511)`Output Voltages: 1.5V, 1.8V, 2.5V, 2.6V, 2.7V, 2.8V, 2.85V, 3V, 3.3V, 4.5V (MAX8510/MAX8511) and Adjustable (MAX8512)`Low 40A Ground Current`Excellent Load/Line Transient`Overcurrent and Thermal Protection |
